220v Ac Wall Mount Pir Motion Sensor Light Switch Time Delay Adjustable Ambient Light Adjustable

220V AC Wall mounted pir motion sensor light switch,MAX 600w load+9m max distance TIP: Neutral wire requiredThe front size is 8.0*8.0 cmThe back size is 4.5*5.0 cmInstructionWelcome to use BS031B Infrared motion sensor!The product is a saving-energy switch, it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.SPECIFICATION:Power Source: 220 -240V/ACDetection Range: 160°Power: 50HzWorking Temperature:-20~+40°CAmbient Light:3-2000LUX(adjustable)<;93%RHTime-Delay : min:10sec±3secMax:7min±2min Installation Height: 1m-1.8mPower Consumption:0.45W (work) 0.1W (static)Rated Load: 600W (incandescent lamp)200W(energy-saving lamp)<;24°C)FUNCTIONS:1.Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the "sun" position (max). It can work in the ambient light less than 3LUX when it is adjusted on the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.2.Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic.(set time)3.Time-delay adjustment: It can be set according to the consumer's desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.4.The switch: "ON","OFF","PIR".INSTALLATION:1.Shut off the power.2.Loosen the connection column on the bottom of sensor, the wire into connection hole, tighten the screws; unload the surface of sensor, connect the sensor into connection box.3.If you want to install it in quadrate connection box, penetrate the setscrew into installation hole, aim at the installation hole on connection box, then tighten the screw; if you want to install it in circular one, you can use the same way as the quadrate, also adjust the sensor's position, tighten the setscrew on surface, then the fixing arm will open automatically, fastenthe connection box .4.Switch on the power then test it.CONNECTION-WIRE DIAGRAM (see the following Fig)Material : PlasticSwitch Type : Sensor SwitchModel Number : 031Features : PIR Motion SensorItem Type : SWITCHESOrigin : Mainland ChinaPower Voltage : 220 -240V/ACDetection Range : 160 degreePower : 50HZAmbient Light : 3-2000LUX(adjustable)Time-Delay : min:10sec+/- 3sec Max:7min+/- 2minRated Load : 600W (incandescent lamp) 200W(energy-saving lamp)<;24 degree)Detection Motion Speed : 0.6-1.5m/sColor : whiteTheory : Motion Sensor Light SwitchTIP : Neutral wire required

• LGYMSZSS 220v Ac Wall Mount Pir Motion Sensor Light Switch Time Delay Adjustable Ambient Light Adjustable