Barix Annuncicom 100 IP Paging and Intercom Codec Device

Barix Annuncicom 100 IP Paging and Intercom Codec Device

Intercom / Paging device with contact closure inputs and relay output, 2W amplifier.
IP Paging and Intercom codec device with mic/speaker and line level interfaces. 2W output power into 8 Ohm, contact closure inputs and relay output. Useable for a wide range of applications like paging gateway, small zone device and Intercom device.

Key Features

• MP3, G711, G.722*, PCM Encoding
• MP3, G.711, G.722*, PCM Decoding
• Shoutcast/Icecast Source capability
• Audio Level Supervision with SNMP Trap generation
• IP Streaming via TCP, UDP, RTP, Multicast
• Microphone Input
• Line Level Output
• Amplified Output 2W (8Ohm)
• Contact Closure Input (2)
• Relay output (1)
• RS-232 Serial Port (1)
• RS-485 Serial Port (1)
• Supply Voltage (9-30 VDC, 12-24 VAC)

Technical Specifications

Electrical
9 to 30 VDC, 12 to 24 VAC, 8 Watt max. on screw terminal block and 2.1mm barrel connector
Ethernet
10/100Mbps auto
RJ-45 connector with integrated Link/Activity LED
Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable
RS-232 and RS-485 Interfaces
On 9-pin Sub-D connector
300..230’400 Baud asynchronous, tunneling or local control
MTBF
calculation 560 000h (according to MIL217F at 25 Degrees C)
Microphone Input
On detachable screw terminal block and 3.5 mm (1/8”) Jack
3 pin TRS, with bias power 2.7VDC
Analog Line Input (mono)
Line level input, 2k Ohm input impedance on RCA 2.2 VPP max, adjustable in sensitivity
Frequency response 20 Hz, 20 kHz (-3dB) *
Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS) *
Audio formats
MP3, encoding/decoding up to 192/320 kbps
PCM 16 bit and 8 bit (uLaw, aLaw) @ 8, 48 kHz
MP3, VBR, CBR* / VBR, CBR* encoding/decoding
PCM, G.711, G.722* encoding/decoding
Analog Line Output (mono)
Line level output, 40, 60 Ohm output impedance on RCA
Output level software controllable
Full scale output voltage: 3 dBu, 3 VPP
Frequency response 20 Hz, 20 kHz (-3dB) *
Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS) *
Speaker out
On detachable screw terminal block
Suggested speaker impedance 4 to 32 Ohm
1 Watt max @ 8 Ohm (2 W max @ 4 Ohm)
Frequency response 20 Hz, 20 kHz (-3dB) *,
Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS) *
Model comparison
Model 60 (48 VDC), PoE, 5 Watt
Model 100 (9, 30 VDC 12, 24 VAC) USB 2 Watt
Model 155 (24, 48 VDC) 5.5 Watt
Model 200 (16, 30 VDC, 48 VDC, 16.24 VAC) PoE, USB, Aipohne 8 Watt
Model 1000 (24.48 VDC)
Discrete I/O
On detachable screw terminal block
1 relay output with normally closed and open contacts
30V 0.5A (AC & DC)
2 discrete / dry contact inputs
* Hardware revision 2 only
Mechanical
Aluminum case, 390 g
Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
rack and wall mountable using accessories
* Depends on used codec, best results @48kHz PCM