Cisco Cable Low-Loss 6m + RP-TNC Connector Networking Cable 236.2" (6 m) Cisco 20 ft Low Loss Cable Assembly W RP-TNC CONNECTORS

Interconnect Cable Attached to all antennas (except the standard dipoles), this cable provides a 50 ohm impedance to the radio and antenna, with a flexible connection between the two items. It has a high loss factor and should not be used except for very short connections (usually less than 10 feet). Typical length on all antennas is 36 in. (or 12 in. on some outdoor antennas). Low-Loss/Ultra-Low-Loss Cable Cisco offers two styles of cables for use with the 2.4-GHz and 5-GHz product lines. These cables provide a much lower loss factor than standard interconnect cable, and they can be used when the antenna must be placed at any distance from the radio device. While these are low-loss cables, they should still be kept to a minimum length. There are two types of cable supplied by Cisco for mounting the antenna away from the radio unit. The 100- and 150-foot cables are LMR600 type cable, while the 20- and 50-foot cables are LMR400 type cables. All four lengths are supplied with one RP-TNC plug and one RP-TNC jack connector attached. This allows for connection to the radio unit and to the interconnect cable supplied on the antennas.

• US MADE Ultra Low-loss Double Shielded MILSPEC Times Microwave LMR-400 Coaxial Cable exceeding all US, NATO and IDF MIL-C-17 Standards - NOT Made in China
• This is Genuine Times Microwave LMR-400 - LMR400 is a Registerd Trademark of Times Microwave
• Designed with RP-TNC Male and Female Connectors to connect Cisco products
• Velocity of Propagation: 86 % nom. / Dielectric Strength:10000 V minute / Corona extinction: 5 kV / Voltage Rating:3700 V Max. / Operating Temperature: +70 °C - Min. Operating Temperature: -20 °C
• If you receive your cable and it is not Times Microwave Brand coax please return it for a violation of Trade Mark