Dental Lab Alginate Mixer Impression Material Mixing Machine with Foot Pedal and Mixing Bowl HL-YMC II

Technical Power supply: 110V/220V 60Hz/50Hz Two speed: Low-speed: 120rpm/min, high-speed: 250rpm/min Regular alarm: After mixing 20s it will have beep sound and alarm light will flash to warn user using the alginate immediately, or it will dry Stop working if overload: When the motor overloaded, the unit will stop working automatically after 3s, press start key to working again Gross weight: 2.4 kg Package Size: 28*24*24cm Packing List: 1 Mixer 1 Mixing bowl 1 Plastic spatula 1 Fuse 1 Manual 1 Certificate 1 Warranty card 1 Foot control Notice: 1. Overload downtime: when the external strong force make motor overload, motor will automatically stop running after 3 seconds. This is a kind of protection system, but not a fault. After that you need step on switch, then it can be turned on, and into the normal working condition. 2. The time for mixing impression material should not be too long (general control in 20 seconds),then you should use it in time, so as to avoid condensing inside the bowl. 3. After using the machine, you should clean the mixing bowl and the impression material which overflow from the machine, and place it indoor where there is ventilated, dry and without corrosive gas.

• Mini-compact design
• Labor-saving, fast, well mix and less bubble
• Control by Button or Foot Switch
• Automatic alert
• Overload prevention