Digital Force Gauge, Digital Dynamometer Force Measuring Instruments Thrust Tester Push Pull Gauge Meter(ELK-100)

Product Description:This product is a simple push pull force gauge with high performance.Screen display 1.Peak mode: After turn on,enter into the measuring interface,click “SET” button can enter into the peak mode directly,record the Max. force value during measuring.2.Push pull force shows:do not move the gauge,the above arrow shows the pull force,the below arrow shows the push force.3.Measuring force value display.4.Three units:N(newton),kg(kilogram),lb(pound) display respectively ,press “UNIT” button to switch .5.Power display.The key introduction OFF/ON(start up ,shut down key):when press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge.ZERO(zero key)The testing value on the screen can be zero when click this key. UNIT( switch unit key)It can switch three different unit s when click this key.ELK Series Analog Dynamometer Parameter: ModeELK-2ELK-3ELK-5ELK-10ELK-20ELK-30ELK-50ELK-100ELK-200ELK-300ELK-500The Max Load Value2N3N5N10N20N30N50N100N200N300N500N0.2kg0.3kg0.5kg1kg2kg3kg5kg10kg20kg30kg50kg0.45Lb0.65Lb1.1Lb2.2Lb4.5Lb6.5Lb11Lb22Lb45Lb65Lb110LbLoad Value Resolution0.001N0.01N0.1N0.001KG0.001KG0.01KG0.001Lb0.001Lb0.01LbThe sensorBuilt-in SensorPrecision±0.5%Power3.7V lithium batteryCharging Time4-6 hoursContinuous Usage TimeAbout 15 hoursBattery Life≥300 timesChargerInput AC 100-240V 50-60Hz Output: 5V 1000mAWorking Temp.5-35 centi-degreeTransportation Temp.-10-60 centi-degreeRelative Humidity15%-80%RHWork EnvironmentNo focus, Non-corrosive in surrounding

• Digital display,easy reading;
• In light weight,small size,easy to carry;
• Unit display:Lb,Kg,N
• The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.
• It adopt the 3.7V lithium battery and auto shut off with no operation in 10 minutes at the same time.