FG-200 DDS Function Generator, 0.01Hz-500KHz Frequency Range, Sine Sawtooth Triangle Waveforms, 50 Ohm Output Impedance, with BNC Coaxial Cable, ABS Material, 5.51x3.15x1.02 Inch

Spec: Item Type: Function Generator Material: ABS Size: Approx. 140 x 80 x 26mm / 5.51 x 3.15 x 1.02in Main Technical Parameters: Output Waveforms: Sine , , Triangle , Positive Sawtooth , Negative Sawtooth , Electrocardiogram , Exponential Rise, Exponential Fall, Pulse, Gaussian Pulse, Sinc Pulse, Half , Full , Noise Power Supply: DC4-9V (Recommend Using DC5V Adapter when using adapter, or 3.7V Lithium Battery when using battery power(battery not included)) Current: 180MA at 5V Frequency Range: Sine 0.01Hz-500.00kHz, Other Waveforms 0.01Hz-100.00kHz Resolution: 0.01Hz Sine Distortion: Output Amplitude: Maximum ±10V (P-P) Output Impedance: 50 ohm DC Offset: Maximum ±10V Can save all set parameters. Comes with a filter that can be turned on and off to adapt to sine and pulse waveform output. Features: Compact size, fully functional, easy to operate and portable. It can be powered by power adapter or 3.7V lithium battery. Used in conjunction with an oscilloscope, it can be used for electronic circuit testing and debugging, frequency characteristics of sound amplifiers and impulse response testing and measurement. Because of its good accuracy and frequency stability, the DDS is also well suited for oscilloscope sweep time factor calibration. The output is suitable for oscilloscope attenuator and probe pulse characterization. There is a filter (which can be turned on and off) to accommodate sine and pulse outputs. This function generator can test a variety of waveforms, such as: sine , , triangle , forward sawtooth , reverse sawtooth and so on. It is specially designed for professional workers. Package List: 1 x Function Generator 1 x USB Power 1 x BNC Coaxial Cable 1 x End BNC Cable 1 x Antenna

• Multifunctional: This source generator meter is multifunctional and can test a variety of forms, such as sine , , triangle , forward sawtooth , reverse sawtooth , and so on. It is designed
• Wide Application: This DDS generator is used in conjunction with an oscilloscope for electronic circuit testing and debugging, frequency characteristics of sound amplifiers and impulse response testing and measurements. There is a filter (which can be turned on and off) to accommodate sine and pulse outputs.
• Compact And Lightweight: This DDS functional generator is small in size and lightweight, which makes it very convenient to carry and use, and it can be powered by a power adapter or a 3.7V lithium battery(battery not included).
• Good performance: This source module has good accuracy and frequency stability, it is also well suited for oscilloscope sweep time factor calibration. Sine waveform 0.01Hz‑500.00kHz (output amplitude decreases with further increase in frequency), other waveforms 0.01Hz‑100.00kHz (but does not limit the upper limit of the adjustable frequency, so if distortion and jitter requirements are not too high, you can further increase the frequency used).
• Excellent ABS Material: This function generator frequency module is made of excellent ABS material, which is sturdy and abrasion not easy to be damaged, and has a long service life.