Hydrothermal Synthesis Autoclave Reactor with PTFE Lined PTFE High Temperature 230°C/446°F (FTFE No., 100, Liner PTFE, Silver, Silver, Stainless Steel 304, 1, PTFE mL)

What Hydrothermal Synthesis Autoclave is？ The hydrothermal synthesis reactor is a closed vessel capable of decomposing insoluble substances. The ultra-high temperature hydrothermal synthesis reactor is externally heated to reduce the volume, and it is advantageous to have multiple reactors at the same reaction operating temperature (for example, heating multiple reactors in an oven). It is a closed container that can decompose insoluble matter. It can be used for sample dissolution pretreatment in atomic absorption spectroscopy and plasma emission analysis, It can also be used for the synthesis of small doses. It can also use strong acid/alkali and high temperature and high-pressure airtight environments to achieve the purpose of quickly digesting insoluble substances.How to choose the reactor? Capacity, pressure, temperature, whether acid and alkali resistant Capacity: First confirm the capacity of your reaction solution (if your reaction solution is 30ml, it is recommended to buy a 100ml reactor, the reactor should be added with 1/3 of the solution when it is used for the first time) Specification 80%. Ensure that the feeding is less than 80%, and for the first time must less than 30%. Temperature and pressure: Then confirm the temperature and pressure you need (you can choose according to the applicable range of each reactor) Whether it can react with acid-base solution: PTFE liner can be used to react with acid-base solution, but PPL liner cannot. Pour the reactant into the PTFE liner and ensure that the feeding is less than 50%, and for the first time must be less than 30% Suggested Heater: It is recommended to use a heater with programmed heating, A muffle furnace is not recommended, because temperature overshooting and a temperature heating rate exceeding the limit will lead to melting of the lining.

• Max Working pressure: 3MPa, Security pressure: 2MPa. Working temperature: 230℃ / 446℉, Security temperature:220℃ / 428℉, Heating / Cooling rate: 5°C/min，41℉/min .
• The PTFE liner has no dead angle, high lubricity and non-stickiness, high temperature resistance, high pressure resistance, corrosion resistance, physical inertness and almost insoluble in all solvents.
• The stainless-steel body is integrally processed and formed, the 304 stainless steel wall is thickened, and the refined thread is matched with the lengthened tightening rod to create a high-pressure air-tight reaction environment to ensure safe experiments.
• The kettle lid body and seal are made of durable and reliable cable sealing structure, and the sealing effect is stable and leak-free for a long time.