PHI Precision CM150-08 Control Module Electric Latch Retraction

The CM150-08 control module is user selectable, meaning that there is a zero to four minute delay after input is removed from it. This module also has a red LED D3 indicator that will blink when a fire alarm has interrupted the circuit. On this module, contact operation will follow when the ELR device has been operated successfully. The input voltage of the CM-150-08 is 5-24 VDC or VAC, and the input current is approximately 0.0005 Amp. The minimum pulse of this unit is 0.25 seconds, with a current pulse of 4.75 Amp. The approximate weight of the CM-150-08 control is one pound. Normally open Input Voltage: 5-24VDC or VAC Input Current: approx. 0.005 Amp. Minimum pulse width: 0.25 seconds Current Pulse: 4.75 Amp. (2 seconds max.) Continuous: 3.6 VDC / 0.8 Amp. User selectable: 0-4 minutes delay after input is removed Fire Alarm Terminal Red LED (D3) blinks when Fire Alarm interrupts circuit Provides immediate termination of output Accepts normally closed contacts or 5-24 Volts from a listed fire detecting device. Voltage Input: Input Current: 0.005 Amp. Minimum pulse width: 0.25 seconds Relay isolated contacts provided for remote signaling (e.g. door operator) Normally open or normally closed contacts are rated at 0.5 Amp., 24VDC or VAC Contact operation follows successful operation of the ELR device.