Power Automatic Transfer Switch, 4P 100A Generator Changeover Switch, AC110V Electronic Circuit Breaker, Rail Mounted Type, Millisecond Fast Switching Controller for PZ30

Spec:Item Type: Power Automatic Transfer SwitchMaterial: PC and silverModel: NLQ3 125 4PRated Current le: 100AInsulation Voltage Ui: AC690VRated Voltage Ue: AC110VFrequency: 50 or 60HzRated Control Voltage US: 110VAC 85% Us to 110% UsLevel: PC levelSpecification: 4PService Life: Electrical: 2000 timesMechanical: 5000 timesRated Short Circuit Current: 50kA: RT16 00 63ARated Impulse Withstand Voltage: 8kVAuxiliary Circuit: 2 relays, each with two sets of capacity: AC110V50HZ le=5yTouch time: Conversion Time:Return Time: Closing Time:How to Use:1. Please check the integrity of the ATS before installation, open or close the ATS with the operating handle, check the flexibility of the drive and test the generation and disconnection conditions of each stage of the load for normal and standby power.2. Use the wiring according to the selling point diagram.PackageList:1 x Power Automatic Transfer SwitchNote:1. The maximum ambient temperature should not exceed 40°C, the minimum should not be lower than ‑5°C, and the average temperature within 24 hours should not be higher than 35 °C. 2. The altitude of the installation site should not be higher than 2000m.3. When the maximum temperature reaches 40°C, the relative humidity of the installation site should not exceed 50%; when the temperature is the lowest temperature ‑5°C, the relative humidity is high, for example: the temperature is 25 °C, and the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the of the product.

• TWO MODES: power automatic transfer switch can be operated automatically or manually, with millisecond switching without power outage, compact structure, , convenient installation and maintenance, and long service life.
• CONTINUOUS POWER SUPPLY: When there is an abnormality in the normal power supply, the backup power supply immediately operates, ensuring the continuity, reliability, and safety of the power supply. When switching between two power sources, if automatic switching is not necessary under special circumstances, it can also be set to manual switching by oneself.
• EXQUISITE MATERIAL: The change-over switch is made of high-quality flame-retardant PC material, with good insulation, exquisite technology, strong isolation and anti-interference ability, self switching and self resetting, high temperature resistance, and silver anti-aging, and
• STANDARD 35MM RAIL INSTALLATION: This automatic transfer switch is suitable for emergency power supply systems with a 50 or 60Hz AC rated 110V 100A. It is designed specifically for household rail installation and is specifically designed for PZ30 distribution boxes.
• WIDELY USED: The power automatic transfer switch is used with confidence, and is used in various where continuous power outages are not allowed, such as homes, shopping malls, factories, laboratories, breeding farms, etc.