Powerwerx Wattmeter-Plus DC Inline Power Analyzer, 75A Continuous, 8 Gauge, SB50 Powerpole Connectors

Display ParametersThe display screen will continuously measure and display Amps, Volts and Watts. All other values are presented sequentially every second. In the lower left position of the display, data values are identified by their units (Ah, Wh, Ap, Vm, Wp).Voltage & Minimum Volts (V, Vm)The displayed Volts (V) value is the average voltage from the last screen refresh. The displayed Minimum Volts (Vm) value is the minimum voltage or “sag” measured on the source side, since the meter’s last startup.Watt-hours (Energy) (Wh)The displayed value is the total energy delivered in Watt-hours since the meter’s last startup. It is measured from the load side for the most accurate results.Amp-hours (Charge) (Ah)The displayed value is the total charge delivered in Amp-hours since the meter’s last startup. It is measured from the load side for the most accurate results.Watts (Power) & Peak Watts (W, Wp)The displayed Watts (W) value is the average Watts (Amps * Volts) from the last screen refresh. The displayed Peak Watts (Wp) value is the maximum watts measured since the meter’s last startup.SpecificationsAmps: 75A continuous, 140A peak, 0.01 A resolution from 1 ~ 140Voltage: 0 ~ 60V, 0.01 V resolution (5 to 60V without optional auxiliary power connector)Wire Type: 8 gauge wire, high temperature (200°C)Watts: 0 ~ 7800W, 0.1 W resolutionAmp-hours: 0 ~ 65Ah, 0.001 Ah resolutionWatt-hours: 0 ~ 6554Wh, 0.1 Wh resolutionDisplay: High-contrast blue backlit LCD displaySize: 4.4 x 1.8 x 1.0" (111 x 45 x 26mm)Weight: 0.28 lbs. (126 g)

• Measuring capacity up to 60V and 140A (peak) and 75A (continuous)
• 8 gauge wire with SB50 Powerpole connectors pre-installed
• Bright blue backlit LCD display
• Measures 8 electrical parameters: Amps, Volts, Watts, Amp-hours, Watt-hours, Peak Amps, Minimum Volts (Sag), Peak Watts
• No configuration and no buttons, works automatically!