Pres-On Gasketing Foam Tape [Single-Sided, Open Cell] (P8500 Series): 1 in. x 50 ft. x 1/2 in. Thick (Black)

Pres-On P-8500 Series Gasketing Open-Cell Foam Tape is a highly flexible fine cell polyester urethane foam tape designed for automotive gasketing applications. The rubber-based, pressure-sensitive adhesive demonstrates a powerful level of adhesion on a variety of surfaces. Excellent for sealing out dirt and moisture, as well as dampening sound and vibration. Additionally, this tape resists aging, weather conditions, and environmental damage, making it ideal for repairs or installations that need to last for years to come.Application Instructions • Thoroughly clean contact surface before use- Once P8500 has been applied, it cannot be removed and reused. Ensure alignment is correct and that contact is being made with all desired surfaces.- If misaligned, remove and apply a new unit- Test product beforehand for system compatibility as individual application conditions can impact results Country of Origin: United States. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 1/2 in. thick foam x 24mm x 50 ft. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

• Pres-On P-8500 Series Gasketing Open-Cell Foam Tape is a highly flexible fine cell polyester urethane foam tape designed for automotive gasketing applications. The rubber-based, pressure-sensitive adhesive demonstrates a powerful level of adhesion on a variety of surfaces.
• Excellent for sealing out dirt and moisture, as well as dampening sound and vibration.
• Resists aging, weather conditions, and environmental damage, making it ideal for repairs or installations that need to last for years to come.
• Application Instructions: Thoroughly clean contact surface before use. Once P8500 has been applied, it cannot be removed and reused. Ensure alignment is correct and that contact is being made with all desired surfaces.
• Carrier/Backing: Polyurethane open-cell foam. Adhesive: rubber-based. Release Liner: white siliconized paper. Adhesion: 128 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: 0F to 140F. Application Temperature: 50F to 80F. Elongation: 150%. Density: 5 to 9 psi. Loop Tack: 115 ounces per inch typical. Core: 3-inch diameter .