Seco-Larm SD-997B-GBQ Electric Deadbolt – Fail-Safe
$127.24
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by www.bosugroup.com
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here.
$127.24
Price when purchased online
Free shipping
Free 30-day returns
Sold and shipped by www.bosugroup.com
Free 30-day returns Details
Product details
| Management number | 205065335 | Release Date | 2025/10/16 | List Price | $57.26 | Model Number | 205065335 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
SECO-LARM Electric Deadbolts add concealed deadbolt security with the added convenience of electrical operation. They are suitable for most wood or hollow metal doors.* Not recommended for use with wooden door frames.
- Adds concealed deadbolt security to most wood or hollow metal doors,* with the added convenience of electrical operation
- Fail-safe operation (unlocks if power is lost)
- Status sensor (Door open/close monitor): SPDT, 500mA@12VDC(NO/NC/COM)
- Adjustable door lock delay timer (0, 2.5, 5, or 9 sec)
- Control wire allows release without cutting unit’s power
- Magnetic switch determines door position for positive locking
- Solenoid attempts to lock several times and then shuts off if door not closed properly to prevent burning out
- Use with an optional digital keypad for high security without a key
- Easily connects to SECO-LARM’s Electronic Keypads
- Suitable for office-type applications
- Shallow design for use with most metal door jambs
- No limiting installation orientation
- Powered by a solenoid
- Stainless steel for strength and long life. Operatiing lifetime: 1,000,000 operations
- Plastic material Tefulon Polymonochlorotrifluoethylene
- Power 12/24 VDC (auto sensing), 900mA@12VDC / 440mA@24VDC on activation, 340mA@12VDC / 180mA@24VDC standby
- Over-current protection 1.5A
- Stainless steel bolt, 5/8” diameter, 5/8” throw
- Lock body (faceplate) dimensions – 77/8“x15/16” (200×32 mm)
- Lock body (cavity) dimensions – 53/4“x11/8“x11/2” (145x28x38 mm)
- Strike plate dimensions – 39/16“x1″x11/8” (90x25x33 mm)
- Plug: Special conic cavity stainless steel (thickness 1.5mm~1.8mm)
Specifications
| Operation | Fail-safe |
| Current Draw- Standby | 340mA@12VDC/180mA@24VDC |
| Current Draw- Active | 900mA@12VDC/440mA@24VDC |
| Status Sensor | SPDT, 250mA @ 12VDC (NO/NC/COM) |
| Operating Voltage | 12/24 VDC |
| Adjustable Delay Timer | 0, 2.5, 5, 9 seconds |
| Weight | 1-lb 13-oz (0.8kg) |
Troubleshooting
| Problem | Possible Cause | Solutions: |
| Deadbolt does not activate when the door closes. | The sensor in the lock body is too far from the magnet in the strike plate. | • Try adjusting the strike plate, lock body position, or shims. |
| Deadbolt activates when the door is closed, but does not lock the door | Deadbolt may not be properly going into the deadbolt hole in the door. | • Make sure the deadbolt is going into the hole and not hitting the strike plate. If not, you must reposition the strike plate. • If the deadbolt is going into the hole, it may be hitting the bottom of the hole (if it is in a wooden door). In this case, drill a deeper hole |
| How to reset unit. | • When testing, if necessary, reset the unit by grounding the orange wire momentarily. | |
| For any other problems. | • Replace the unit, and test again. A problem unit can also be substituted for a working unit in another door frame to see if it works there. |
Bestseller ranking
Door Hardware
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form